casing pipe for oil well drilling
1: Winding angle, 45°～65° (winding angle can be adjusted according to different requirements to achieve better mechanical properties);
2: Fiber content (weight ratio), 70% to 75%;
3: Density, 2.00g/cm³;
4: Water absorption, less than 0.03%;
5: Axial thermal expansion coefficient, 1.8E-05 1/K;
7: Chemical resistance Mineral oil: excellent;
8: Solvent and dilute acid: excellent;
9: Tensile elastic modulus, axial 14000 MPa;
10: Tensile strength: 280 MPa in the axial direction; 600 MPa in the circumferential direction;
11: Shear strength: 150 MPa;
13: Compressive strength: axial 240 MPa;
14: Relative dielectric constant 2-3.2;
15: Dielectric loss factor 0.003-0.015;
17: Dielectric strength: axial 3～6kv/mm; radial 10～12kv/mm;
18: Lightning shock: 110KV;
19: Power frequency shock: 50KV;
20: Heat resistance class: B, F, H;
21: inner diameter > 5mm; outer diameter < 300mm; length < 2000mm.
The above data is only for reference, the casing parameters we produce are customized for each customer's needs!
Contact available at :
Jacky Shen - Sales manager
Email：[email protected]
Our Hetai company specializes in producing casing pipes for oil drilling, which are primarily used to support the wellbore, prevent collapse and leakage, and can also serve as a conduit and protect the oil layer during drilling. Our products are made of high-performance epoxy fiberglass.
The following are the features of our casing pipes:
1. High strength: made of high-performance epoxy fiberglass, the casing has excellent bearing and tensile properties.
2. Corrosion resistance: the casing can resist the erosion of corrosive substances such as acids and alkalis, ensuring durability and longevity of the product.
3. Stability: strict quality control and inspection ensure the stable physical and chemical properties of the casing, meeting international standards.
4. Excellent design: the size and structure of the casing are adjusted according to different drilling environments and reservoir conditions to ensure optimal performance during drilling operations.
